Sony SNC-P5 - Manual (Page 29)

A
d
mini
s
tra
ting
t
he
Came
ra
Basic Operations of Easy mode
29
Displays the Advanced mode menu (page 28).
White balance
Select the white balance mode.
Auto, Indoor or Outdoor can be selected.
Brightness
You can adjust the brightness of the image sent from the
network camera in eleven levels.
Click the button of the brightness you want to select. The
button on the left side is the darkest (Dark), and the
button on the right is the brightest (Bright).
Image quality
You can select the quality of the image sent from the
network camera.
Usually select Normal. To give priority to the
transmission speed and to watch a smooth image, select
Low. To give priority to the image quality, select High.
Note
According to the line condition, smooth image may not
be obtained even if you select Low.
Image size
You can select the image size sent from the network
camera.
640 × 480 (VGA), 320 × 240 (QVGA) or 160 × 120
(QQVGA) can be selected.
Microphone
Select whether you send the audio from the built-in
microphone or from the m microphone input
connector. Select On to send the audio from this
network camera microphone.
Note
When you change the Microphone setting, click
Refresh of the browser to reflect the change in the
opening main viewer page.
Date & time setting
When you click Setting, date and time of the camera is
set to suit those of the computer.
Note
The setting time may not accord with the exact time
according to the network environment.
e-Mail (SMTP)
This is the setting for sending an e-mail with an attached
image file of the monitor. Click e-Mail (SMTP) and the
Easy mode (e-Mail) setting mode menu appears.
(page 29)
Easy mode (e-Mail)
This is displayed when you click e-Mail (SMTP) of the
Easy mode menu.
Note
While the camera video mode is set to MPEG4, the
image of the composite video signal output from the
video output connector of the camera may be distorted
during mail transmission.
e-Mail (SMTP)
Select On when you use e-Mail (SMTP) function. When
you select On, setting options are displayed. If you do
not use it, select Off and click OK below.
SMTP server name
Type the SMTP (sending mail) server name up to 64
characters, or type the IP address of the SMTP server.
Authentication
Select the authentication required when you send an e-
mail.
Off: Select if no SMTP authentication is necessary
when an e-mail is sent.
On: When authentication is necessary an e-mail is sent,
select one of the authentication methods from the
followings.
SMTP: Select if authentication is necessary when an
e-mail is sent.
POP before SMTP: Select if POP before SMTP
authentication is necessary when an e-mail is
sent.