Sony SNC-P5 - Manual (Page 61)

A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Schedule — Schedule setting Menu / Setting the Alarm Buffer — Alarm buffer setting Menu
61
Setting the Schedule
— Schedule setting Menu
When you click Schedule on the Advanced mode menu,
the Schedule setting menu appears.
This is the same menu as the setting menu which is
displayed when you click Schedule to set Effective
period and Schedule in FTP client setting menu, e-Mail
(SMTP) setting menu, Image memory setting menu,
Alarm out setting menu and so on.
Example: When setting e-Mail (SMTP) (the alarm
sending) in the Schedule setting menu
Schedule selection
Select the list box to specify the schedule you want to
set. e-Mail (SMTP) – Alarm, e-Mail (SMTP) –
Periodical, FTP – Alarm, FTP – Periodical, Image
memory – Alarm, Image memory – Periodical,
Alarm output – Alarm or Alarm output – Timer, can
be selected.
Mon (Monday) to Sun (Sunday)
The time period on the right of the checked day is the
effective period of the schedule.
Start time, End time
Specify the Start time and the End time.
Use the same time schedule every day
When this is checked, the Start time and End time set
to Mon (Monday) are applied to all days. In this case,
the Start time and End time of the other days than Mon
(Monday) cannot be input.
OK/Cancel
See “Buttons common to every setting menu” on page
31.
Setting the Alarm Buffer
— Alarm buffer setting Menu
When you click Alarm buffer on the Advanced mode
menu, the Alarm buffer Setting menu appears.
You can set the Pre-alarm image and audio (the image
and audio before the alarm detection) and the Post -
alarm image and audio. These can be set when Alarm
sending or Alarm recording of FTP client setting menu
or Image memory setting menu is set to On, and besides
when Use alarm buffer is selected.
Video mode
The Video mode set in the Common tab of the Camera
setting menu is displayed.
MPEG4: Shows the present output format of the camera
is MPEG4.
JPEG: Shows the present output format of the camera is
JPEG.
Recording capacity
Displays the maximum recording capacity of alarm
buffer in the present camera setting of the video mode,
image size, bit rate and frame rate.
Pre-alarm period: Displays the maximum recording
capacity of image/audio before the alarm detection.
Post-alarm period: Displays the maximum recording
capacity of image/audio after the alarm detection.
Recording time
Set the recording time for the Pre-alarm image/audio
and Post alarm image/audio.
Pre alarm period: Type the recording time of the
image/audio before the alarm detection.
Post alarm period: Type the recording time of the
image/audio after the alarm detection.