Sony SNC-P5 - Manual (Page 44)

A
d
mini
s
tra
ting
t
he
Came
ra
Configuring the Network — Network setting Menu
44
PPPoE Tab - Setting of PPPoE
Connection
Use it when you connect the camera with PPPoE (Point-
to-Point Protocol over Ethernet). PPPoE connection is
the protocol that is widely used in xDSL (digital affiliate
line such as ADSL, VDSL or SDSL) as the
authentication and connection system.
PPPoE
Set whether you connect the camera using PPPoE
function or not. When On is selected, PPPoE connection
is used.
IP address
When you connect to the network by PPPoE function, IP
address obtained at PPPoE connection is displayed.
User ID
Type the user ID for the authentication necessary for
PPPoE connection. Type it up to 64 characters.
Password
Type the password for the authentication necessary for
PPPoE connection. Type it from 1 to 32 characters.
Re-type password
To certain the password, re-type the characters as them
typed in the password box.
Obtain DNS server address automatically
Select it to obtain the address of DNS server
automatically.
Use the following DNS server address
Select this when you set the fixed address as the IP
address of DNS server.
Primary DNS server
Type the IP address of the primary DNS server.
Secondary DNS server
Type the IP address of the secondary DNS server.
OK/Cancel
See “Buttons common to every setting menu” on page
31.
Dynamic IP address notification
Tab — Notifying the IP Address
When the DHCP setting is set to On or PPPoE setting is
set to On on the Network tab, you can send notification
of the completion of the network settings using the
SMTP or HTTP protocol.
e-Mail (SMTP) notification
Select On to send an e-Mail when the DHCP setting is
completed.
SMTP server name
Type the name or IP address of the SMTP server you
want to use for sending an e-Mail, up to 64 characters.
Authentication
Select the authentication required when you send an e-
Mail.
Off: Select if no authentication is necessary when an e-
mail is sent.
On: When authentication is necessary an e-mail is sent,
select one of the authentication methods from the
followings.
SMTP: Select if SMTP authentication is necessary
when an e-mail is sent.