Sony SNC-P5 - Manual (Page 23)

O
per
at
ing
t
he
Came
ra
Controlling the camera on a panorama image
23
Zoom an image by the camera
zoom bar
When you can control this function, the zoom bar is
displayed below the window.
You can specify a location to be zoomed by clicking the
zoom bar.
The zoom bar is displayed /not displayed by clicking the
icon below the image frame.
WIDE marge icon: Click to move the zoom to the
WIDE Merge (the same magnification).
TELE marge icon: Click to move the zoom to the
TELE Merge (3-fold magnification).
Not to display the zoom bar
When you are not going to use the zoom bar, it is not
displayed by pressing
button under the
panorama window.
Moving the camera to the preset
position
Select the preset position name from the PRESET list
box. Then, the camera will move to the preset position
that you have stored in memory at “Preset position
setting Menu”.
Controlling the camera
on a panorama image
When you can control the camera, the panorama widow
is displayed under the normal camera window.
In the panorama window, an image around the camera is
displayed as a panorama image. When you click on the
displayed panorama image, the camera faces the clicked
place.
Creating the panorama image
Create the panorama image with the supplied “SNC
panorama creator”. Refer to page 70 for details.
Tip
The panorama image is the still image converted from
the image taken when you were going to create a
panorama image with “SNC panorama creator”. When
the camera is moved or when the layout around the
camera is changed, create the panorama image again.
Facing the camera toward the
specified point
1
Create a panorama image with “SNC panorama
creator” and display it.
Still image
Red zooming frame Click the left button of the mouse on
the still image and drag it.
Normal camera window
SNC-P5
panorama window