Siemens HIPATH V1.2.33 - Manual (Page 10)

Listing Connected IP Phones
10
Creating a Device List
Before searching for optiPoint phones, you must specify the IP addresses
in the Add Devices mask.
Call with
•
Add from the Edit menu on the menu bar or
• CTRL+A or
• the Add devices icon on the toolbar ( Æ page 9)
The following dialog appears:
Click the required dialog option, either Add a single device or Add a
range of devices. Enter an IP address or an IP address range which you
want to scan for devices. Confirm you input with Add.
A table is displayed in the Device_List window.
Close the Add Devices dialog with Quit if you do not want to add any
more IP addresses.
Overlapping ranges are not permitted. However, you can enter an IP
address as an address range, for example
192.168.1.105 to 192.168.1.105.