Siemens HIPATH V1.2.33 User Manual
Page 56
Parameters
56
Default domain name
Æ Domain name here.
Default Gateway
•
Enter the
Æ IP Address that was assigned to your Æ PBX in the De-
fault Gateway provided this value was not assigned dynamically by a
Æ DHCP server.
•
If the value was assigned dynamically, it is read-only here.
DHCP
•
Enable this option if you want a
Æ DHCP server to assign the neces-
sary IP data dynamically for the phone.
•
Disable this option if there is no DHCP server available in the IP net-
work. In this case, the data for the Terminal IP Address and Terminal
Mask must be manually assigned and the
Æ Default Route must be
manually set.
Dialplan enabled
Select on or off to determine whether or not a
Æ Dial Plan should be used.
Dial Plan and Download file
Via Browse, scan the local file system for a
Æ Dial Plan to download. Se-
lect Download file to send the required
Æ Dial Plan to the telephone.
DNS server address
•
Æ IP Address of the Æ DNS server here if this was not
assigned dynamically by a
Æ DHCP server and you are not operating
the optiPoint device at a
•
Default address: Blank by default.
DNS domain name
•
Only enter the name of the associated
Æ Domain if you cannot operate
the optiPoint device at a
•
Default name: Blank by default.
Download Server IP Address
Æ IP Address of the Æ FTP server here so that you can upload
and download files from/to optiPoint 410.
Domain access code