Siemens HIPATH V1.2.33 - Manual (Page 62)

Parameters
62
Loge filename
Enter the filename of the logo (for example logo of your company) which
should be shown on the disply.
Mask
Enter the value for the network mask for Æ Mask 1 or 2. In general, this is
255.255.255.0.
Message centre
Call number of a phone messaging system.
Migration flag
Switch the flag on or off (system switchover).
Mobility
Mark if you want to support mobility.
MoH filename
Name of the Æ MoH file.
National dial prefix
Enter the national dial prefix here, for example 0.
New Domain Password
Contains the Windows password for the telephone user.
Originating line preference
Reserved for later use.
Operating mode
The following options are available:
•
Auto detect
• Direct access
• LAN access
Outbound proxy
You must enable this option if you are using a " Æ Outbound Proxy Æ Proxy
server" so that you can assign it a valid domain name.