Siemens HIPATH V1.2.33 - Manual (Page 13)

Listing Connected IP Phones
13
Address
The meaning of the icons in the address column is as follows:
Status
The status column can contain the following values:
MAC address
This column contains the hardware address of the device.
E.164
This column contains the terminal number for calling up the device (for ex-
ample not for the U
P0/E
device type).
User ID
H323 ID (not read out for HiPath 4000).
Version
Specifies the current software version of the device.
Indicates an individual address.
Indicates the lower threshold of an IP address range.
Indicates the upper threshold of an IP address range.
Indicates a device found.
Not scanned The tool made no attempt to set up a connection to
this device.
Scanning... Temporary status during which the program tries to
set up a connection to the device.
No route There is no IP route to this address.
No response There was no answer from the device.
Unsuitable device An unrecognized device answered.
Ready A recognized device answered.