Siemens HIPATH V1.2.33 - Manual (Page 65)

Parameters
65
Ring No Reply Timer
Configurable time in seconds after which the ringing status is displayed for
a telephone. When the phone rings, its status is IDLE until the Ring Seen
Timer expires. Once the timer has expired, the telephone displays its
"Ringing" status.
Ring Seen Timer
Configurable time in seconds after which the "Presence" status is dis-
played for the telephone. For example, if the time is set to five seconds,
this means that the "Absent" status is displayed if a call rings for more than
five seconds.
Rollover type
How should a trunk key react if a trunk is busy and the call is signalled at a
second trunk? The following options are available:
•
No ring
• Alert ring
Route
Enter the first or second destination address preset for a Æ Router.
RTP Packet Size
The packet size is entered as a time unit. You can select the values auto,
10 ms and 20 ms.
Screen saver filename
• This cannot be configured for all optiPoint phones.
• Enter the name of the file that you want to use as your screen saver.
• The file must be saved on the Æ FTPserver in a specific directory.
• Valid file types: GIF, JPG.
Secondary DNS server address
Alternative address to Æ DNS server address.