Siemens HIPATH V1.2.33 - Manual (Page 58)

Parameters
58
FTP username
• Enter the name that was set in the Æ FTP server as the user for ac-
cessing this server.
• The name must match the Æ FTP password.
• Possible values: 1 to 24 characters.
Gatekeeper address
Enter the IP address of the Æ Gatekeeper if known (otherwise it is entered
by "autodiscovery").
Gatekeeper discovery address
Enter the Æ IP Address for a non-HiPath Æ Gatekeeper.
Gatekeeper id
Enter the Æ Gatekeeper identifier here.
Gateway
Enter the Æ IP Address of the first or second Æ Gateway, for example, of
a HG 1500 or HG 3530 board.
Gateway address/HTTP gateway/proxy address
• This can only be configured for optiPoint 410 standard/advance, 600 of-
fice HFA, 600 office
UP0/E
, 600 office SIP V2.x.
• If a Æ WAP gateway is available in the network, enter the Æ IP Ad-
dress of this gateway here.
Group pickup URI
Specify a URI for group pickup here.
H323 gateway address
Enter the Æ IP Address of the Æ Gateway for Æ H.323 Standard.
H450 features
Set to on if there are non-HiPath devices in the network. Call forwarding
and transfer to non-HiPath users, however, is not permitted.
Help Internet URL
•
This can only be configured for optiPoint 410 standard and advance.
• Enter the file names of the optiPoint 410 online help.
Home page
Shows the WAP page configured as the "home page".