Other functions, Changing the sound settings, Adjusting the sound characteristics – Sony DSX-S100 User Manual

Page 18: Customizing the equalizer curve - eq3, Adjusting setup items - set, Adjusting setup items — set, Other functions changing the sound settings

Advertising
background image

18

Other functions

Changing the sound settings

Adjusting the sound
characteristics

1

Press the select button repeatedly
until the desired item appears.

2

Rotate the control dial to adjust the
selected item.

3

Press

(BACK).

The setting is complete and the display
returns to normal reception/play mode.

The following items can be set (follow the page
reference for details):

*1 When EQ3 is activated.
*2 When the audio output is set to “SUB-OUT”

(page 19).
“ATT” is displayed at the lowest setting, and can be
adjusted up to 21 steps.

*3 When AUX source is activated (page 19).

Customizing the equalizer curve
— EQ3

“CUSTOM” of EQ3 allows you to make your
own equalizer settings.

1

Select a source, then press the select
button repeatedly to select “EQ3.”

2

Rotate the control dial to select
“CUSTOM.”

3

Press the select button repeatedly
until “LOW,” “MID” or “HIGH” appears.

4

Rotate the control dial to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.

Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.

5

Press

(BACK).

The setting is complete and the display
returns to normal reception/play mode.

Tip
Other equalizer types are also adjustable.

Adjusting setup items — SET

1

Press and hold the select button.
The setup display appears.

2

Press the select button repeatedly
until the desired item appears.

3

Rotate the control dial to select the
setting (example “ON” or “OFF”).

4

Press and hold the select button.
The setup is complete and the display returns
to normal reception/play mode.

Note
Displayed items will differ, depending on the source
and setting.

The following items can be set (follow the page
reference for details):

EQ3

Selects an equalizer curve from 7 music types
(XPLOD, VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).

DSO (Dynamic Soundstage Organizer)

Creates a more ambient sound field.
To select the DSO mode: “1,” “2,” “3” or “OFF.”
The larger the number, the more enhanced the
effect.

LOW*

1

, MID*

1

, HIGH*

1

(page 18)

BALANCE

Adjusts the sound balance between the left and
right speakers.

FADER

Adjusts the relative level between the front and
rear speakers.

SUB*

2

(Subwoofer volume)

Adjusts the subwoofer volume.

AUX LV*

3

(AUX level)

Adjusts the volume level for each connected
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.

CLOCK-ADJ (Clock Adjust) (page 6)

CT (Clock Time)

Activates the CT function: “ON,” “OFF”
(page 12, 13).

Advertising