Siemens SCALANCE X-200 - Manual (Page 67)

Installation and Maintenance
5.6 Fitting the IE FC RJ-45 Plug 180
Note
This does not apply to the SCALANCE X208PRO device
Removing the IE FC RJ-45 Plug 180
1. Press on the locking mechanism of the IE FC RJ-45 Plug 180 gently to remove the plug.
Figure 5-6 Releasing the RJ-45 Plug
If there is not enough space to release the lock with your hand, you can also use a 2.5 mm
screwdriver. You can then remove the IE FC RJ-45 Plug 180 from the twisted pair socket.
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Commissioning Manual, 1,
5-7