Siemens SCALANCE X-200 - Manual (Page 75)

Diagnostics over Industrial Ethernet
6.1 Configuration with the Primary Setup Tool
Figure 6-3 Downloading the Module
Starting Web Based Management
INC devices (Industrial Network Component) such as the SCALANCE X‑200 have a Web
Based Management. Select the device you want to configure with Web Based Management
and perform one of the following steps to start Web Based Management:
• Select the Module > INC Browser menu command.
• Click on the third button from the left in the toolbar (module with four blue cords).
Figure 6-4 Starting Web Based Management
If the Module > Start INC Browser and the module icon are deactivated, there is no Web
Based Management for the selected module.
Removing a Module
You can remove a module from the list in the left part of the program window by selecting the
Module > Remove Module menu command. Using this menu has no effect on the existence
of a module in the network, after browsing the network again, all modules would be
displayed again.
Industrial Ethernet SCALANCE X-100 and SCALANCE X-200 Product Line
Commissioning Manual, 1,
6-7