Siemens DataNET Hub (DNH) - Manual (Page 26)

18 •••• Installation 2000585-001
Wall or Rack Mounting Installation, Continued
The DNH rack mount configuration is designed for a standard 19-inch
cabinet. The cabinet should have at least seven inches of vertical space
for mounting the DNH. See Figure 1-5 for minimum width and depth
mounting dimensions.
For installation sites that must conform to CE (Conformite Europeene)
Certification see page 23, CE Installations.
The wiring routing and entry requirements for the DNH are dependent
upon the site requirements; see page 19, Site Wiring Requirements:
• CE (Conformite Europeene) Certified Area; see Page 23
• NEC Division 2 or Non-Hazardous Areas
• Cenelec Zone 1 or Zone 2 Areas
• Rack Mounting Non-Hazardous Area.
Rack Mounting
CE Installations
Wiring Requirements