Siemens DataNET Hub (DNH) - Manual (Page 77)

2000585-001 Command Summary •••• 69
Chapter 4
Command Summary
Command Descriptions
This chapter is intended for maintenance personnel.
This chapter provides definitions for all of the commands you will be us-
ing for setup purposes or for performing test diagnostics.
These are the commands that are unique to the Advance DataNET Hub.
config address ip
xxx.xxx.xxx.xxx Set the device IP address for this hub-half
config device id Configure the DataNET hub device ID
config display Display the current non-volatile parameters
config netmask
xxx.xxx.xxx.xxx Set the IP subnetmask for this hub-half
config iproute
xxx.xxx.xxx.xxx Set the default router IP address for this hub-
half
config timeserver
xxx.xxx.xxx.xxx Configure the IP address of a DataNET time
server
date Set/display time and date
del Delete selected SAT entries
display Display SAT table
display links Display link state table
dn Displays or edits the parameters for setup
time or window
download Download new hub firmware via the RS-232
Configuration port
events on Enable reporting of internal messages via the
internal buffer
events off Enable reporting of internal messages via the
internal buffer
help Lists available CLI commands
list List next 22 log events
list nnn List 22 events, starting with number nnn.
Description
Unique Commands