Sharp MD-X60H User Manual
Page 12
<P=002>
(Continued)
■
When choosing a CD for playback
Press one of the CD 1
0
- 3
0
buttons to select the CD you want to listen to.
●
Only the selected CD will be played back.
CD
1 -3
CD
1 -3
CD
CD
When selecting
disc 1
When selecting
disc 2
When selecting
disc 3
Notes:
●
If any disc tray is open, it will be automatically closed.
●
If the CD
0 6
button is pressed, continuous playback will begin from the first
track of disc 1, even after disc 2 or disc 3 has been selected.
Direct playback:
If a CD is loaded in the unit, pressing the CD
0 6
button turns the power on and
begins playback.
MINIDISC OPERATION
■
Loading and playing MiniDiscs
1
Press the MD
■
button.
●
The power will be turned on automatically, and the unit will enter the MD mode.
2
Load a MiniDisc in the direction indicated by the arrow on the MiniDisc, with
the labeled side facing up.
●
Even if the unit is in the stand-by mode, the power will be turned on automatically
when an MD is loaded into the unit.
●
The total number of tracks and the total playing time on the MiniDisc will be
displayed.
●
The music schedule will be displayed only for the number of tracks on the Mini-
Disc.
●
If the MD contains more than 21 tracks, "
C
" will appear.
3
Press the MD
0 6
button.
●
If the MD has a name, the name will appear and scroll across the display. Then,
the elapsed playing time will appear.
●
If the MD has no disc or track names, the elapsed playing time will appear.
●
When the last track has been played back, this unit will stop automatically.
To interrupt playback:
Press the MD
0 6
button.
●
Press the MD
0 6
button to resume playback from the same point.
To stop playback:
Press the MD
■
button.
To remove a MiniDisc:
Press the
7
button.
●
The MiniDisc will be ejected.
Direct playback:
If a MiniDisc is loaded in the unit, pressing the MD
0 6
button turns the power
on, and begins playback.
Notes:
●
The unit cannot enter the stand-by mode when reading the information on a
MiniDisc.
●
If TV or radio interference occurs when using the MD, move the unit away from
the TV or radio.
●
Although MiniDiscs will not normally skip due to vibration, you may hear a skip
in the sound if there is continuous vibration.
If the volume is turned up too high, a skip may occur depending on the contents
of the MD. If this happens, turn the volume down and the skipping should stop.
●
If "DISC ERR" is displayed during MD operation, see "TROUBLESHOOTING"
on page 50, and try again.
1
3
1
3
Music schedule
More tracks indicator
Disc name
(Displayed only when a disc name has been
programmed)
After scrolling the disc
name
Total number of tracks
Total playing time
2
MD-X60H(SUK) TINSE0227AWZZ
11