Sharp MD-X60H - Manual (Page 41)

<P=002>
(Continued)
■ Erase
MD
2
1
1,2
3,4
1
2
3
4
2
1
2
3,4
2
3
4
To erase tracks one at a time:
1
Whilst in the stop mode, select the track you want to erase using the jog dial.
Or start playing the track to be erased, and then press the MD
0 6 button.
● The unit will enter the pause mode.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select "ERASE"
using the jog dial.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the MD ■ button.
4
Press the ENTER button again.
● The track is erased, and the unit is stopped at the beginning of the previous
track.
Notes:
● Once a track has been erased, it cannot be recovered. Double-check the track
number before erasing it.
● When a track is erased, the numbers assigned to the tracks following the erased
track will be automatically decreased by one.
● When a track is erased, the track name will be erased at the same time.
● This function cannot be used whilst a programme is being entered ("PROGRAM"
is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22).
First, cancel the programme or random play mode before trying to use this
function.
To erase all of the tracks at once:
1
Press the MD ■ button.
● The total number of tracks and the total playing time on an MD will appear.
2
Press the NAME/TOC EDIT button, and within 10 seconds, select "ALL ERASE"
using the jog dial.
3
Within 10 seconds, press the ENTER button.
● To cancel the operation, press the MD ■ button.
4
Press the ENTER button again.
● All of the track numbers and track names will be erased.
Note:
● This function cannot be used whilst a programme is being entered ("PROGRAM"
is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22).
First, cancel the programme or random play mode before trying to use this
function.
MD-X60H(SUK) TINSE0227AWZZ
40