Sharp MD-X60H - Manual (Page 28)

<P=002>
(Continued)
■ Recording desired tracks from a CD onto a MiniDisc
(Track Editing)
Several consecutive tracks, starting from the first track on a CD (for example: from
the first track to the fourth track), can be recorded onto an MD.
1
Press the CD ■ button.
2
Load a compact disc and a recordable MiniDisc.
3
Check the recording mode by pressing the REC MODE button.
4
Press the TRACK EDIT button.
● To record a single track, skip to step 6.
5
Select the last track to record by pressing the TRACK EDIT button.
● Each time you press the TRACK EDIT button, the track number will increase.
● If you select more than 100 tracks or more tracks than there are on the CD or
if the total recording time exceeds 150 minutes, "EDIT OVER" will be displayed.
Then, pressing the TRACK EDIT button will not select the next track number.
6
Press the CD 0 MD button.
● If recording does not begin, press the CD 0 MD button again. (See page 26.)
● Recording will start from the tracks selected in disc 1, disc 2 and disc 3, in that
order. After recording, the CD and the MD will stop automatically.
MD
MD
4,5
6
1
3
3
1
2
2
To cancel the track edit operation:
Press the CD ■ button before pressing the CD 0 MD button.
To stop recording:
Press the CD ■ or MD ■ button.
4
5
6
3
1,6
3
4,7
1,6
2
4,7
7
2
5
5
7
● After the track numbers have been written to the MiniDisc, playback and recording
will stop.
It is not possible to pause in the recording mode.
■ Recording only your favorite tracks onto a MiniDisc whilst
listening to a CD (Hypertrack Editing)
1
Press the CD ■ button.
2
Load a compact disc and a recordable MiniDisc.
3
Check the recording mode by pressing the REC MODE button.
4
Press the CD 0 6 button.
5
Press the TRACK EDIT button whilst playing a track you want to record.
● Repeat this operation whilst continuing to listen to the CD.
If the number of programmed tracks exceeds 32 or if the total rec-
ording time exceeds 150 minutes:
Pressing the TRACK EDIT button will not add any track to the programme after
the track which encountered the limit.
6
Press the CD ■ button.
● Playback will stop.
● If the CD is played to the end, the unit will stop automatically.
7
Press the CD 0 MD button.
● If recording does not begin, press the CD 0 MD button again. (See page 26.)
● Recording will start.
● After recording is finished, the CD and the MD will stop automatically.
To cancel a programmed track
Press the CD ■ button to stop playing the CD. Then, press the CD ■ button again.
To change a programmed track
Cancel the programmed track. Then perform the operation from step 4 again.
You can also perform the following operation.
When you know the track number you want to record, you can record it using the
Hypertrack Edit function whilst the CD is in the stop mode.
①
Select the track number you want to record using the jog dial.
②
Press the TRACK EDIT button.
● Repeat steps 1 and 2 to add other track numbers you want to record to the
programme.
③
Press the CD 0 MD button.
(Example)
When selecting all of the tracks up to the fourth track
Total number
of tracks Last track
number Total recording time
Lit
Hyper-music calendar
(You can check the programmed track numbers.)
MD-X60H(SUK) TINSE0227AWZZ
27