Sharp MD-X60H User Manual
Page 32
<P=002>
(Continued)
■
Recording from a CD or an MD to a cassette tape
(One-Touch Editing)
REVERSE
MODE
REVERSE
MODE
DOLBY
NR
DOLBY
NR
MD
TAPE
TAPE
TAPE
CD
TAPE
MD
MD
CD
TAPE
CD
CD
CD
MD
MD
A CD or an MD can be recorded, starting from the first track, with a one-touch
operation.
1
Load a blank cassette into the cassette compartment.
●
Wind past the tape leader which cannot be recorded on.
2
Press the REVERSE MODE button.
... To record on only one side.
... To record on both sides.
3
Select the Dolby NR mode by pressing the DOLBY NR button.
●
When recording with the Dolby NR system, turn on the
G
indicator.
●
When not recording with the Dolby NR system, turn off the
G
indicator.
4
Recording from a CD:
Press the CD
0
TAPE button.
Recording from a MiniDisc:
Press the MD
0
TAPE button.
To stop recording:
Press the CD
■
(MD
■
) or TAPE
■
button.
■
Recording from a CD or an MD to a cassette tape
(Synchronised Recording System)
When a CD or an MD is played, recording will start automatically.
1
Load a blank cassette into the cassette compartment.
●
Wind past the tape leader which cannot be recorded on.
2
Press the REVERSE MODE button.
... To record on only one side.
... To record on both sides.
3
Select the Dolby NR mode by pressing the DOLBY NR button.
●
When recording with the Dolby NR system, turn on the
G
indicator.
●
When not recording with the Dolby NR system, turn off the
G
indicator.
4
Press the TAPE
●
6
button.
●
The unit will enter the recording stand-by mode.
5
Recording from a CD:
Press the CD
0 6
button.
Recording from a MiniDisc:
Press the MD
0 6
button.
To interrupt recording:
Press the CD
0 6
(MD
0 6
) button.
Press the CD
0 6
(MD
0 6
) button again to resume recording.
To stop recording:
1
Press the CD
■
(MD
■
) button, whilst recording.
●
The CD or MD will stop, and the unit will enter the stand-by mode.
2
Press the TAPE
■
button.
●
The tape will stop.
3
2
MD-X60H(SUK) TINSE0227AWZZ
31