Sharp MD-X60H - Manual (Page 48)

<P=004>
(Continued)
MD
TAPE
MD
TAPE
A.MARK
2
6
6
3
3
5
6
6
3
2
3
1
1
What is the space-cut function?
If there is a silence in the playback signal that lasts 3 sec-
onds during a synchro recording, the recording will stop
automatically and unit will enter the recording stand-by
mode. Then, when sound from the playback unit resumes,
recording will restart automatically.
(A space of 3 seconds is placed between tracks.) ● If there is noise between tracks of the sound source, the synchro recording or
the space-cut function may not work properly.
If this happens, make the recording manually.
● When you need to record tracks or audio that include very quiet passages lasting
3 seconds or more, manual recording is recommended.
■ Manual recording
You can start recording by yourself whilst listening to the playback from other
equipment (tuner or CD).
1
Load a recordable MD or Tape.
2
Press the AUX button to select the auxiliary input.
● Select the input that corresponds to the terminals where the external unit you
will record from is connected.
● Each time the button is pressed, the display will change as follows:
3
Press the MD ● REC or TAPE ● 6 button.
4
Start playback on the external unit.
● To record analogue signals, perform steps 5 - 6.
● To record digital signals, perform step 6.
5
Adjust the recording level using the INPUT LEVEL control.
● The maximum level should not exceed "0 dB".
6
Press the MD 0 6 or TAPE 0 button.
To stop recording:
Press the MD ■ or TAPE ■ button.
AUX 1 AUX 2 AUX OPT.
To turn off the auto mark function:
● Press the A.MARK button on the remote control.
■ Track numbers
Recording CDs from a digital source:
Track numbers are automatically created to mark the beginning of each track in
the signal being recorded.
● When making digital recordings using a CD player as the source, track numbers
may not be created automatically, depending on the CD player used.
Other considerations:
When there is a period of silence of 1 second or longer in the playback signal, a
track number will be automatically created.
If there is no silence, tracks will be recorded as one track.
● If there is a lot of noise in the playback signal, track numbers may not be created.
● Recordings can be made without using the auto mark function.
MD-X60H(SUK) TINSE0227AWZZ
47