Projecting a reversed/inverted image, Projection from behind the screen, Projection using a mirror – Sharp XG-C60X User Manual

Page 36: Ceiling-mount setup, Setup

Advertising
background image

-32

When using the default setting.

On-screen Display

Projecting a Reversed/Inverted Image

Projection from behind the screen

■ Place a translucent screen between the projector and the au-

dience.

■ Reverse the image by setting “Rear” in “PRJ Mode”. See

page

71

for use of this function.

Projection using a mirror

■ Place a mirror (normal flat type) in front of the lens.

Info

When using a mirror, be sure to carefully position both the pro-
jector and the mirror so the light does not shine into the eyes of
the audience.

Ceiling-mount setup

■ It is recommended that you use the optional Sharp ceiling-mount

bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately).

AN-XGCM55 ceiling-mount bracket, its AN-EP101B
extension tube and AN-JT200 universal bracket, adaptor for
non-level ceiling installation (for U.S.A.).

BB-M20T ceiling adaptor, its BB-NVHOLDER280,
BB-NVHOLDER550, BB-NVHOLDER900 ceiling mount
systems (for GERMANY).

AN-60KT ceiling-mount bracket, its AN-TK201 and AN-TK202
extension tubes (for countries other than the U.S.A. and
GERMANY).

■ Be sure to adjust the position of the pro-

jector to match the distance (H) from the
lens center position (see page

28

) to

the lower edge of the image, when
mounting the projector on the
ceiling.

■ Invert the image by setting

“Ceiling + Front” in “PRJ
Mode”. See page

71

for

use of this function.

The image is reversed.

When using the default setting.

On-screen Display

The image is inverted.

Setup

XG-C60X_E_PDF_p25_32.p65

03.8.28, 2:08 PM

32

Advertising