Sharp XG-C60X - Manual (Page 41)

Basic Operation
-37
Turning the Power off
1
Press
STANDBY
on the projector
or on the remote control,
then press that button again
while the confirmation message
is displayed, to put the projec-
tor into the standby mode.
Note
•
If you accidentally pressed
STANDBY
or and do not want
to put the projector into the standby
mode, wait until the confirmation
message disappears.
•
The projector cannot be operated
while a message “Shutting Down.
Please Wait.” is displayed.
2
Unplug the power cord from the
AC outlet after the cooling fan
stops.
Info
•
Do not unplug the power cord dur-
ing projection or cooling fan opera-
tion. This can cause damage due to
the rise in internal temperature, as
the cooling fan also stops.
MUTE button
STANDBY button
ENTER button
MENU
button
', ", \, |
buttons
XG-C60X_E_PDF_p33_41.p65 03.8.28, 2:08 PM 37