Sharp XG-C60X - Manual (Page 79)

Easy to Use Functions
-75
Setting the Anti-Theft
The anti-theft function prevents unauthorized use of the projector. You can choose to use
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the anti-theft function is activated, users will need to enter the correct keycode each
time the projector is turned on. Failure to enter the correct keycode will cause images not to
be projected. The following procedures explain how to use this function.
Entering the Keycode
•
“Anti-Theft” cannot be selected unless
“Password” is set. (See page
73 .)
•
When “Anti-Theft” is selected, the password
input box will appear. Enter the keycode af-
ter the right password is entered.
Select “Anti-Theft” in the “Options (2)”
menu on the menu screen.
➝ For operating the menu screen, see
pages
42 to 45 .
Info
•
Once the function is activated, you must
remember the correct keycode. We sug-
gest you record the keycode in a safe
place where only authorized users have
access. If you lose or forget your keycode,
you will need to contact your nearest
Sharp Authorized Projector Dealer or Ser-
vice Center (see page
96 ). You may need
to bring your projector to them to restore
the projector to original factory condition
(password and keycode reset).
1
Press any button you like on
the remote control or projec-
tor to set the first digit in “New
Code”.
Note
•
The following buttons on the remote
control and projector cannot be set
as keycodes:
•
ON button
•
STANDBY button
•
ENTER button
•
UNDO button
•
MENU button
•
FORWARD button
•
BACK button
XG-C60X_E_PDF_p71_78.p65 03.8.28, 2:28 PM 75