Displaying the break timer, Displaying and setting the break timer – Sharp XG-C60X User Manual
Easy to Use Functions
Displaying the Break Timer
Displaying and Setting
the Break Timer
. The break timer
starts to count down from 5
” is displayed, press
' , "
" , \
\ or |
| to set the break
You can set anywhere between 1 and
60 minutes (in 1 minute units).
The break timer starts to count down
as soon as ' , " , \ or | is pressed.
to cancel the break
Auto Power Off function will be temporarily
disabled during the break timer.
When no input signal is detected for more
than 15 minutes, the projector will auto-
matically enter the standby mode if the
break timer has elapsed.
The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of “Startup Image” (see page
This function can be used to show the remaining time for break during meeting.
03.8.28, 2:10 PM