Sony XR-C290 - Manual (Page 6)

6
Actual total number: Sony XR-C290 ( E ,S,C,A) 3-856-352-11 (1)
EN
SEEK
AMS
To locate the
succeeding the tracks To locate the
previous tracks
Switching to the radio during fast-
winding the tape
— Automatic Tuner Activation (ATA)
Press (5) during playback.
“ATA” appears on the display.
When fast-forwarding or rewinding with
(PRESET/DISC), the tuner will turn on
automatically.
Skipping blanks during tape
playback — Blank skip
Press (6) during playback.
“BL.SKIP” appears on the display.
Blanks longer than eight seconds will be
automatically skipped during tape playback.
Locating the beginning of the
tracks — Automatic Music Sensor (AMS)
You can skip up to nine tracks at one time.
During playback, press either side of
(SEEK/AMS) momentarily.
Note
The AMS function may not work when :
• the blanks between tracks are shorter than 4 seconds
• there are noises
• there are long sections of low volume or quiet sections.
Changing the displayed items
Each time you press (DSPL) momentarilly
during tape playback, the displayed item
changes as follows:
z Tape playback z Clock z Frequency*
* While the ATA function is activated.
Playing the tape in
various modes
Searching the desired track
— Intro scan
Press (1) during playback.
“INTRO” appears on the display.
The first 10 seconds of all the tracks are played.
When you find the desired track, press again.
The unit returns to the normal playback mode.
Playing tracks repeatedly
— Repeat play
Press (2) during playback.
“REP” appears on the display.
When the currently played track is over, it will
be played again from the beginning.
To cancel this mode, press again.