Konica Minolta IP-711 - Manual (Page 104)

7. Settings and Operations for Scan Functions
95
1. Using Network Management Utility Light, make the settings for mail
transmission, mail reception, mail options, and printing for the Internet Fax
received data. ☞p.96
2. Using Network Management Utility Light, make the setting for One-Touch Key
Registration or One Time Registration.
The destination, destination e-mail address, and e-mail address to which Internet
Fax is replied can be set on the One-Touch Key Registration screen, and the
destination, destination e-mail address, e-mail address to which Internet Fax is
replied, and other scan mode functions can be set on the One Time Registration
screen. ☞p.110
3. On the copier control panel, specify the destination to which the scanned data is
to be transmitted.
The destination is set by selecting the key, in which One-Touch Key Registration
or One Time Registration has been made in step 2, or through direct input.
☞p.100
4. On the copier control panel, specify the document scan mode.
5. Press the Start key on the copier. This lets the copier scan the document and
send the scanned data through Internet Fax.