Konica Minolta IP-711 - Manual (Page 35)

4. Settings Required for Network Printing
26
4.6 Print Service Setting in NetWare
■ Print settings on the PC from which printing is effected
The controller supports the following environment.
■ NetWare Server Setting Procedure
•
NetWare 3.2 print server mode settings
1. Log on to the NetWare server, in which PServer is to be registered, by the
Supervisor right.
2. Start Pconsole.
3. Select “Print Queue Information” from “Available Options” and then press
“Enter.”
4. Click “Insert,” type “Print Queue Name,” and press “Enter” to register the [print
queue name].
5. Press “Esc” to return to “Available Options.”
6. Select “Print Server Information” and press “Enter.”
7. Press “Insert,” type “Print server name” in “New print server name,” and click
“Enter” to register the [print server name].
8. Select the print server, which has been created, and press “Enter” to display the
“Print Server Information” menu.
9. Select “Print Server Configuration” from the “Print Server Information” menu
to display the “Print Server Configuration Menu.”
10. Select “Printer Configuration” and press “Enter” to display the “Configured
Printers” list.
11. Select “Not Installed” at the top row and press “Enter” to display “Printer 0
configuration.”
12. Change the printer name in the “Name” column to “IP-711” and press “Enter” to
validate the change.
13. With the “Type” column selected, press “Enter.” Then, select “Remote Parallel/
LPT1” and press “Enter” to validate the selection.
14. Press “Esc” to save the settings.
15. Press “Esc” once again to return to “Print Server Configuration Menu.”
16. Select “Queues Serviced by Printer” and press “Enter.”
NetWare Version Protocol Emulation Service Mode
NetWare 3.2 IPX Bindery PServer/Rprinter
NetWare 4.x IPX NDS,
Bindery emulation PServer/Nprinter
NetWare 5.x IPX,
TCP/IP NDS PServer/NDPS
(lpr)