Konica Minolta IP-711 - Manual (Page 45)

4. Settings Required for Network Printing
36
•
NetWare 5.x Novell Distributed Print Service (NDPS) settings
* Before making settings for NDPS, make sure that the NDPS Broker and NDPS
Manager have been created and loaded.
* Before starting the procedure, make sure that the TCP/IP protocol has been set
in the NetWare server and an IP address has been assigned to the controller, and
started, using Network Management Utility Light.
Creating the NDPS Printer Agent
1. Log on to the NDS Tree by the Administrator right.
2. Start NWADMIN.
3. Right-click the “Organization Unit” container under “Organization,” in which
the printer agent is created. From “Create,” select “NDPS Printer.”
4. Type the “Printer Name” in the “NDPS Printer Name” column.
5. Select “Create a New Printer Agent” in the “Printer Agent Source” column and
click “Create.”
6. Check the printer agent name and, in the “NDPS Manager Name” column,
browse through NDPS managers and set one.
7. Select “Novell Printer Gateway” “Gateway Types” and set it in “Gateway
Types.”
8. In the “Configure Novell PDS for Priner Agent” window, select and set
“((None))” for printer type and “Novell Port Handler” for port handler type.
9. Select and set “Remote (LPR on IP)” for “Connection Type.”
k4334P153CA