Konica Minolta IP-711 - Manual (Page 16)

7
3. Settings Required for Local Connection
To make a local connection between the PC and printer controller, make the settings
by following the procedures given below.
3.1 Installing the Printer Driver
For Windows 98, 98SE and Me:
The following procedure applies to the installation of the printer driver for Windows
98.
NOTE
To connect the copier to a PC, in which Windows 98, 98SE, or Me is installed,
through the USB, it is necessary that the USB device driver be installed in the
PC.
For the procedure to install the USB device driver, see “Installing through Plug
and Play” and “Connecting the USB Cable.” ☞p.15
1. Click the “Start” button and, from the menu that will then appear, select
“Settings” – “Printers.”
2. The Printers window will appear.
Double-click the “Add Printer” icon in the window.
3. The “Add Printer Wizard” will start.
Click the “Next>” button.
4. A window will appear, asking how the printer is to be connected.
Select “Local printer” and then click the “Next>” button.
4668P004CA