Konica Minolta IP-711 - Manual (Page 79)

7. Settings and Operations for Scan Functions
70
5. Press the Start key on the copier. This lets the copier scan the document and
send the scanned data to the FTP server.
If the URL notification party has been specified, the information on the location,
in which scanned data is stored, is transmitted by e-mail.
6. Download the scanned data from the FTP server using the FTP client software.
If URL Notification has not been specified:
Directly access the FTP server from your FTP client software and download the
data from the folder, in which the scanned data has been stored. At this time, a
user name and a password may be necessary to access the FTP server.
If URL Notification has been specified:
Refer to the information given in the e-mail message and access the location, in
which scanned data is stored. At this time, a user name and a password may be
necessary to access the FTP server.
Controller Setting
■ Registering FTP Servers
Up to five FTP servers can be registered.
Setting from Network Management Utility Light
1. Start Network Management Utility Light.
2. Enter the password and log on to the Administrator mode.
3. From the “Network” tab, select “FTP Server” – “FTP Server Registration.”
k4334P172CA
Not registered
Registered