Konica Minolta IP-711 - Manual (Page 65)

6. Printing
56
6.8 Effecting Folding
Folding is used in combination with Booklet to produce a booklet through center
folding and center stapling. It can be used only when the copier is equipped with
the Finisher FS-231.
Setting Procedure
1. Select the “Setup” tab.
2. Clicking “Detail of Output Setting” will open a dialog box for setting details.
Make the following settings in the “Folding” column.
OFF : Disables folding.
Crease + Center Staple : Produces a booklet through center folding and center
stapling.
NOTE
No folding can be effected if the number of prints to be made at once exceeds 10.