Konica Minolta IP-711 - Manual (Page 38)

4. Settings Required for Network Printing
29
22. Using Network Management Utility Light, set the controller as detailed below
and restart it.
Details of Setting:
Enable NetWare : Enable
Frame Type : Auto Detect (Select the frame type according to the
network environment.)
Bindery/NDS : Bindery
Print Server Name : Print server name created in step 7
Print Server Password : (Set only when the password is set on the NetWare
server side.)
Mode : Nprinter/Rprinter
Printer Number : 255 (Set 255 or the numbers (0-15) assigned to the
printer.)
23. At the NetWare server console, display the print server screen and check that
“IP-711” (created printer) is in the status of “Waiting for job” with printer
connected to it.
k4334P163CA