Konica Minolta IP-711 - Manual (Page 148)

Appendixes
139
Initial Screen Components
The screen that is displayed immediately after Network Management Utility Light
has been accessed consists of the following components. This screen is generally
referred to as the user mode screen and can be viewed by anyone. In addition,
entering the specified number in “Administrator’s Code” on the user mode screen
will allow you to enter the “Administrator Mode.” ☞p.141
MEMO
To set the display environment (language) of Network Management Utility Light,
enter the Administrator mode and make the necessary settings on “Preference.”
(1) Status display
Displays the system status by means of icons and text.
(3)
k4334P214CA
(5)
(4)
(1)
(2)