Kodak DCS Pro 14n - Manual (Page 113)

Controlling Exposure
April 29, 2004 7-3
Click Balance Click balance takes RGB values from the current image or from previously
saved or loaded settings and applies them to subsequently captured
images.
Using the Current Image for
Click Balance
1. Select an image (see page 11-7 ).
2. Choose White Balance from the Capture menu, choose Click Balance
then highlight Image.
The selected image appears.
3. Press any side of the Four-way switch to move the eyedropper over a
neutral (gray) area of the image.
4. Press the OK button.
The pixel values in the area under the eyedropper are sampled.