Kodak DCS Pro 14n - Manual (Page 58)

4-10 April 29, 2004
The Basics
Setting ISO ISO determines the sensitivity of the camera’s imager to light. Increasing or
decreasing the ISO increases or decreases sensitivity.
The range of available ISO settings varies, depending on the image
resolution.
You can change ISO settings in 1/3 stop increments. The factory default is
80.
1. Choose ISO from the Basic menu then highlight the desired setting.
2. Press the OK button.
Shortcut:
• You can also access this function using the Digital Status button
and the Digital Status LCD (see page 4-9 ).
Resolution Range
13.5 MP 80 - 400
6 MP 80 - 800
3.4 MP 80 - 800
.8 MP 80 - 800