Inserting a memory card, Setting focus, Inserting a memory card -3 setting focus -3 – Kodak DCS Pro 14n User Manual
Page 51
Advertising
The Basics
April 29, 2004
4-3
3. Set the lens to its minimum aperture and lock.
Inserting a Memory Card
1. Open the Media door.
2. Insert a CF card in the top slot. (The label should be up.)
NOTE: In Advanced mode (see
) you can use either one or two
cards: a CF card in the top slot and either an SD or a MMC card in
the bottom slot.
3. Close the Media door.
Setting Focus
1. Set the Focus Mode selector to S (Single Servo AF).
Be sure the Focus Mode selector clicks into position.
NOTE: Do not rotate the lens focus ring while the Focus mode is set to S.
2. Set the Exposure Mode dial to AF Area mode.
Advertising