Setting the time/date, Setting user mode, Setting the time/date -19 setting user mode -19 – Kodak DCS Pro 14n User Manual
Page 67
Advertising
![background image](/manuals/157619/67/background.png)
The Basics
April 29, 2004
4-19
Setting the Time/Date
A time and date stamp is associated with each image file.
A CR 2032 coin cell battery maintains the time and date for approximately
one to two years. If this battery loses its charge, you must replace the
battery (see
) and reset the time and date.
1. Choose Time/Date from the Basic menu.
2. Press the right or left side of the Four-way switch to select hours,
minutes, or seconds. Press the top or bottom of the Four-way switch
to change the value.
3. Repeat step 2 for year, month, and day.
4. Press the OK button.
Shortcut:
• You can also access this function using the HotKey shortcut (see
Setting User Mode
Follow the steps on
to choose Basic or Advanced mode.
Advertising