Turning the overexposure indicator on and off, Turning the overexposure indicator on and off -16 – Kodak DCS Pro 14n User Manual
Page 64
Advertising
4-16
April 29, 2004
The Basics
Turning the Overexposure
Indicator On and Off
You can indicate areas of overexposure in images in Single or Multiple
Image Display modes.
1. Choose Overexposure Indicator from the Basic menu, then highlight
On.
Highlight Off to turn the Overexposure Indicator off.
2. Press the OK button.
When the overexposure indicator is turned on, areas of overexposure
flash on and off.
Advertising