Loading a job tracker file from a card, Loading a job tracker file from a card -10 – Kodak DCS Pro 14n User Manual
Page 78
Advertising
5-10
April 29, 2004
Configuring your Camera
Loading a Job Tracker File
From a Card
1. Insert the card in the camera.
2. Choose Job Tracker from the Tools menu then highlight Load.
3. Choose Load from Card.
If you chose Load from Card and there are two cards in the camera,
highlight a card.
4. Highlight the file to be loaded.
5. Press the OK button.
The file is loaded into camera memory and becomes the active job
tracker file.
Advertising