Kodak DCS Pro 14n - Manual (Page 84)

5-16 April 29, 2004
Configuring your Camera
Changing Intervalometer
Settings
Option Menu Procedure Range Default
Enable 1. Choose Intervalometer from the Tools
menu, choose Enable, then highlight Yes
or No.
2. Press the OK button.
Count 1. Choose Intervalometer from the Tools
menu, then highlight Count.
The current count appears with the first
digit highlighted.
2. Press the top or bottom of the Four-way
switch to change the first digit.
3. Press the right of the Four-way switch to
highlight the next digit, then repeat step 2.
4. Press the OK button.
1 - 9999 10
Interval 1. Choose Intervalometer from the Tools
menu, then choose Interval.
2. Press the right or left of the Four-way
switch to access hours, minutes, or
seconds. Press the top or bottom of the
Four-way switch to change the number.
3. Press the OK button.
3 seconds to
23:59:59
(HH:MM:SS) 10
seconds
Delay 1. Choose Intervalometer from the Tools
menu, then choose Delay.
2. Press the left or right of the Four-way
switch to access hours, minutes, or
seconds. Press the top or bottom of the
Four-way switch to change the number.
3. Press the OK button.
1 second to
23:59:59
(HH:MM:SS) 1 second