Kodak DCS Pro 14n - Manual (Page 56)

4-8 April 29, 2004
The Basics
Setting Basic Mode
1. If the Image LCD is off, press the Menu button to turn it on.
If the Image LCD is on and images are displayed, press the Menu
button to display the Basic Mode menu.
NOTE: If the screen at the left appears, the camera is already in Basic
mode.
2. If a tabbed menu appears, the camera is in Advanced mode. To
change to Basic mode, press and hold the Menu button, and press the
right side of the Four-way switch to highlight the Tools tab.
3. Press the top or bottom of the Four-way switch to highlight User
Mode.
4. Press the right side of the Four-way switch to enable the User Mode
menu.
5. Press the bottom of the Four-way switch to highlight Basic.
6. Press the OK button.
The Basic Mode appears.
Accessing Functions Using
the Basic Menu
1. Press the top or bottom of the Four-way switch to highlight a menu
option.
If a pop-up menu appears, press the right side of the Four-way switch
to enable the menu, then press the top or bottom of the Four-way
switch to highlight a menu option.
2. Press the OK button.