Konica Minolta Polygon Editing Tool - Manual (Page 236)

234
Chapter
2
Tool
Menu
9i
910
900
700
300
Tool – Measure
Measuring Dimensions within the Selected Element(s)
This command measures specified dimensions within the selected element.
Parameters for [Tool-Measure] Dialog Box
Points Measures the distance between multiple points on the element (the distance between two selected
points, or the dimensions of the “bounding box” fitted to three or more selected points).
Point to Face Measures the distance between a specified point and a selected face (where the face is specified by
selection of multiple points).
Angle Measures the angle formed by three specified points.
Circle Measures the circle formed by multiple points (the circle defined by three specified points, or the
circle formed by fitting of multiple selected points.)
Operating Procedure
1 From the element list, select the de-
sired elements
2 Select the [Measure] from the [Tool]
menu.
The [Tool – Measure] dialog box will appear.
3 Select the type of measurement you
want to perform by checking on the
radio button.
M
emo
The measurement results is displayed in the upper-right win-
dow. Note that the content of this window can be edited.
The measurement procedure is indicated sequentially in
the Status window.
4 Click the [Exit] button.
Tool – Measure mode will be canceled.