Konica Minolta Polygon Editing Tool - Manual (Page 58)

56
Chapter
2
File
Menu
910
File – Import – Digitizer – One Scan (When VIVID 910 is Selected)
Parameters for [File-Import-Digitizer-One Scan] Dialog Box
AF Executes auto-focus.
Note
This parameter is effective only when VIVID 910 is connected.
Distance Checking this checkbox enables distance setting.
Note
This parameter is effective only when VIVID 910 is connected.
Intensity Checking this checkbox enables LD and Gain setting.
• LD :
Sets the laser power.
• Gain : Sets the gain.
Note
This parameter is effective only when VIVID 910 is connected.
Scan Performs a scan.
Note
This parameter is effective only when VIVID 910 is connected.
Import CDM Import the saved CDM data.
Color Read Takes a color shot. Clicking this button at the end of scan will take a color shot again and display
the updated color image.
Note
This button is effective if the [Use Color] checkbox is checked.
Edit Clicking this checkbox enables you to delete the area that is not necessary for threedimensionaliza-
tion by specifying it in the Work window area using the mouse.
Auto Store If this checkbox is checked, data save will be performed automatically when corresponding points
are designated in the Work and Store window areas.
Store Registers the data present in the Work window area as store data, puts it into three-dimensional
form and displays it in the element view window.
Mono/Color/Pitch Switches display mode for the data currently displayed in the Work window area.
• Mono : The current image is displayed in monochrome. This parameter is effective only when
VIVID 9i is connected.
• Color : The color data acquired from the scan is displayed.
• Pitch : The color display is done in accordance with the distance data from Near to Far.
Angle Rotates the rotary stage to the desired angle using the slide bar.
This item is displayed when the rotary stage has been initialized successfully.
Prev/Next Switches from one stored data to another.
[Prev] button : Displays the previous data.
[Next] button : Displays the next data.
Delete Deletes the stored data currently displayed in the Work or Store window area. The corresponding
elements in the element view window are also deleted at the same time.
View Displays/hides the data currently displayed in the Store window area into the element view window.
OK Keeps the element data created during command execution and exits the File-Import-Digitizer-
One Scan command.
Note
If the [Save Raw Data] checkbox is checked, the data save dialog box is displayed.
Cancel Exits the File-Import-Digitizer-One Scan command.
The element data created during command execution will be deleted.
Option Displays the [File-Import-Digitizer-One Scan-Option] dialogbox.