Konica Minolta Polygon Editing Tool - Manual (Page 67)

65
Chapter
2
File
Menu
910
File – Import – Digitizer – Step Scan (When VIVID 910 is Selected)
Parameters for [File-Import-Digitizer-Step Scan] Dialog Box
AF Executes auto-focus.
Note
This parameter is effective only when VIVID 910 is connected.
Distance Checking this checkbox enables distance setting.
Intensity Checking this checkbox enables LD and Gain setting.
• LD: Sets the laser power.
• Gain: Sets the gain.
Auto Scan Checking this checkbox causes scan, store and stage control operations to be automatically
performed sequentially.
Scan Performs a scan.
Note
This parameter is effective only when VIVID 910 is connected.
Import CDK Import the saved CDM data.
Color Read Takes a color shot. Clicking this button at the end of scan will take a color shot again and display
the updated color image.
Note
This button is effective if the [Use Color] checkbox is checked.
Edit Clicking this button enables you to delete the area that is not necessary for three-dimensionalization by
specifying it in the Work window area using the mouse.
Auto Store Checking this checkbox performs store operation automatically at the end of scan operation.
Store Registers the data p resent in the Work window area as store data, puts it into three-dimensional
form and displays it in the element view window.
Mono/Color/Pitch Switches display mode for the data currently displayed in the Work window area.
• Mono: The current image is displayed in monochrome. This parameter is effective only when
VIVID 910 is connected.
• Color: The color data acquired from the scan is displayed.
• Pitch: The color display is done in accordance with the distance data from Near to Far.
Current Angle The current step angle is displayed. Normally, the angle is updated when a store operation is car-
ried out, so additional operations are not necessary. When the step angle has been changed to the
desired angle manually, data scan can be performed at the new step angles.
M
emo
This item is not displayed if “Free” is selected for [Rotation Step].
Angle Rotates the rotary stage to the desired angle using the slide bar.
This item is displayed when the rotary stage has been initialized successfully.
Chart Scan Used to scan the Calibration Chart data.
M
emo
This item is displayed if “Free” is selected for [Rotation Step].
Stage Apply Initializes the rotary stage.
Prev/Next Switches from one stored data to another.
[Prev] button: Displays the previous data.
[Next] button: Displays the next data.
Delete Deletes the stored data currently displayed in the Work or Store window area. The corresponding
elements in the element view window are also deleted at the same time.
View Displays/hides the data currently displayed in the Store window area into the element view window.
OK Keeps the element data created during command execution and exits the File-Import-Digitizer-
One Scan command.
Note
If the [Save Raw Data] checkbox is checked, the data save dialog box is displayed.
Cancel Exits the File-Import-Digitizer-One Scan command.
The element data created during command execution will be deleted.
Option Displays the [File-Import-Digitizer-Step Scan-Option] dialogbox.