Konica Minolta Polygon Editing Tool User Manual
Page 129
127
Chapter
2
File
Menu
910
Note
If you do not enter the correct lisence code, the [Con-
vert] button will not be enabled. This means that you
will not be able to make use of the aligned data.
File – Import – Digitizer – Easy Align
2
Adhere markers onto the object.
M
emo
Note that some objects have delicate surfaces that may
be damaged when markers are peeled off after use. In
particular, the markers we provide have fairly strong ad-
hesive and will become difficult to peel off if left attached
for more than 24 hours.
3
Adjust the position of the object and
move the VIVID 910 forward or back so
that the object appears at the middle of
the image area at the appropriate view
angle.
4
Click the [Scan Mode] tab, and set the
scan mode to either Fine or Fast.
5
If you are using a turntable, click the
[Turntable] tab and set the serial port,
the rotating stage type, and the rotation
angle.
6
Set other parameters as necessary.