Konica Minolta Polygon Editing Tool - Manual (Page 84)

82
Chapter
2
File
Menu
900
910
File – Import – Digitizer – Step Scan (When VIVID 900/910 is Selected)
10 Place the calibration chart on the rotat-
ing stage.
When the “Scanning the Calibration Chart.”
message dialog box appears, position the
chart with the black line facing the VIVID, and
place it on the rotating stage so that both
entire side surfaces are observed in the view-
finder.
• If “Chart” is not displayed in [Current angle],
click the left mouse button and select “Chart”
from the pull-down menu that appears.
11 Click the [OK] button.
The calibration chart will be scanned.
Note
Make sure that the acquired range image looks like
the good example given below. If it resembles the bad
example, click the [Scan] button again to re-scan the
calibration chart.
M
emo
If it is not possible to perform calibration using calibra-
tion chart S, use calibration chart M.
12 Click the [Convert] button.
The [File-Import-Digitizer-Step Scan-Convert]
dialog box will appear.
Calibration chart S
#ALIBRATION
Good example Bad example