The 'terminal' menu – Kamera Werk Dresden CMOS User Manual
Page 25
Manual: CMOS Industrial Camera LOGLUX
i5
Version 1.08 (04/07)
KAMERA WERK DRESDEN GmbH
Page 25 of 46
The 'Terminal' menu
This menu is used for configuring the LOGLUX i5 CL camera by means of the integral ASCII terminal.
For the commands required to configure the camera see the camera manual. Selecting the 'Advanced
features' option is a prerequisite for using the terminal.
The ASCII terminal incorporated in the
LuxWare configuration software divides into
three parts. At the top is a toolbar including
functions that serve the logging of the
configuration process. All user inputs and
camera outputs are logged in the window
beneath. At the bottom, the user can enter the
configuration commands as specified in the
camera manual, and send them to the camera
by actuating the ENTER key (
↵
).
Toolbar functions:
Displays a previously created and saved
macro. Clicking the button opens the
standard Windows
dialog 'Play Macro ...'
whereupon the user may choose the desired
.LLM file.
A command sequence entered from the
terminal is saved as macro. Clicking the
button opens the standard Windows
dialog
'Record Macro ...' whereupon the user may
give the desired .LLM file a name.
All inputs and outputs which are
displayed in the log window are saved in
a text file. Clicking the button opens the
standard Windows
dialog 'Save as ...'
whereupon the user may give the desired .LOG
file a name.
All inputs and outputs which are
displayed in the log window are deleted.
This function is used for setting the font size and type of the terminal. Option 'Dump all'
displays all messages generated by the camera.
The 'Timeout' box can be used to select the serial communication time out in seconds.
The commands and registers available for the configuration of the LOGLUX
i5 CL camera are
described in chapters 'Description of the LOGLUX
i5 CL communication log' and 'Description of the
LOGLUX
register set' (see below).
Figure 21 : The 'Terminal' menu