Introduction – Kamera Werk Dresden CMOS User Manual

Page 4

Advertising
background image

Version 1.08 (04/07)

Manual: CMOS Industrial Camera LOGLUX

i5



Page 4 of 46

KAMERA WERK DRESDEN GmbH

Introduction

This manual describes the installation and functions of the CMOS industrial camera LOGLUX

i5 CL

made by KAMERA WERK DRESDEN GmbH, as well as the software and hardware components
which are additionally required for a camera system.

The below chapters will enable the user to operate a camera system including a CMOS industrial
camera LOGLUX

i5 CL, and to fully exploit the camera functions by applying the supplied LOGLUX

LuxWare configuration tool. Furthermore, the commands referred to herein permit the ambitious
programmer to configure the camera at CMOS sensor register level by means of the integral terminal.

Note:

This manual was drawn up with utmost care. However, since the unit is constantly being
improved, no guaranty can be given that the information is complete and correct at any
time. We have made great efforts to provide you with a perfect product but in view of the
numerous computer configurations it is impossible to guarantee that your computer or your
application works trouble-free in all configurations and combinations.
We cannot guarantee that a specific application purpose is served. Within the framework of
the statutory regulations, any liability for direct damage, indirect damage and third-party
damage resulting from the purchase or operation of a LOGLUX i5 CL CMOS industrial
camera is excluded. Liability in cases of intent and gross negligence remains unaffected
therefrom. In any case, our liability is limited to the purchase price of the unit.

This manual is protected by copyright. All rights created thereby, in particular the right to translate, reprint or lecture, to use
figures or tables, to broadcast, microfilm or reproduce the contents or parts thereof in any other way or to store it partly or wholly
in data processing systems, are reserved. Also in individual cases, the manual or parts thereof are permitted to be reproduced
only within the scope of the Copyright Act of the Federal Republic of Germany of September 9, 1965 as amended. As a rule, a
fee is charged for any reproduction. Violations are subject to the penal provisions of the Copyright Act.

Copyright

 KAMERA WERK DRESDEN GmbH 2004

Even if no express reference is made thereto, the use or reproduction of model or trade names mentioned in this manual does
not justify the assumption that such names are free names within the meaning of the trademark and proprietary rights that could
be used by everyone.

Wherever direct or indirect reference is made in this manual to acts, regulations or standards (e.g. DIN, VDI, VDE), KAMERA
WERK DRESDEN GmbH cannot guarantee that they are correct and up-to-date. We recommend to consult the complete
regulations or standards as amended for the specific own application.

KAMERA WERK DRESDEN GmbH
Bismarckstrasse 56
D-01257 Dresden

Phone (0351) 2806 0
Fax

(0351) 2806 392

eMail

[email protected]

Web

www.kamera-werk-dresden.de

Advertising