Konica Minolta Network Printer - Manual (Page 116)

Printing Hints (continued)
8-18 Maintenance & Supplies
Maintenance & Supplies
CALL FOR PM IS DISPLAYED IN MESSAGE AREA
Contact your service representative for Preventive Maintenance.
FINISHER STAPLE RESULT IS NOT AS EXPECTED
The 2 staple position functions only on print paper that is loaded vertically (portrait style).
PRINTS SKEW IN THE STAPLED SETS
Check to see if print paper is excessively curled in the tray.
Reload the print paper upside down.
USING PUNCH, PRINTS CANNOT BE PUNCHED
Check to see if the message “Trash basket of Punching kit (unit) is full” is displayed.
Empty the trash basket of Punching kit or Punching / Z-Folding unit.
PRINTS CANNOT BE STAPLED OR PUNCHED IN POSITION
Check to make sure the side guide plates are securely aligned to the print paper in the
paper tray to be used.
Check to see if print paper is excessively curled in the tray. Reload the print paper upside
down.
HOME