Konica Minolta Network Printer - Manual (Page 89)

Output Modes 6-13
Output Modes
Manual Finishing
The Manual Finishing function is available only with the Cover Sheet Feeder option (PI-
110) installed on the FS-110/210 Finisher. To use this convenient function, simply place a
set of paper into the lower tray of the cover sheet feeder, select the desired mode from the
Manual Finishing operation panel located on the top of the finisher, then press the Start/
Stop button.
Available finishing modes according to the optional configuration are described below.
FS-110 Finisher + PI-110 Cover Sheet Feeder
• 1 oblique staple: Primary (main) tray
• 2 parallel staples: Primary (main) tray
FS-110 Finisher + PI-110 Cover Sheet Feeder + PK-110/120 Punching Kit
• 1 oblique staple
• 2 parallel staples
• Punch
FS-210 Finisher + PI-110 Cover Sheet Feeder
• 1 oblique staple
• 2 parallel staples
• Stapling & Folding (2 staples in the center + Folding)
• Three-Folding
FS-210 Finisher + PI-110 Cover Sheet Feeder+ PK-110/120 Punching Kit
• 1 oblique staple
• 2 parallel staples
• Stapling & Folding (2 staples in the center + Folding)
• Three-Folding
• Punch
Specifications for Manual Stapling 1 oblique staple and 2 parallel staples
❒ Paper size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", A4, A4R (8.27"x11.69", 210 mm x
297 mm)
❒ Paper weight: 16~24 lb (20 lb paper is recommended)
❒ Staple capacity: 50 sheets max. (20 lb paper)
❒ Output tray: Primary (main) tray
Specifications for Manual Punch
❒ Paper size: 11"x17", 8.5"x11", A4 (8.27"x11.69", 210 mm x 297 mm)
❒ Paper weight: 16~24 lb (20 lb paper is recommended)
❒ Punch capacity: 200 sheets max. (24 lb paper) or within 30 mm thick
❒ Output tray: Primary (main) tray
❒ The machine with PZ-108 Punching / Z-Folding Unit requires PK-110/120 Punching Kit to use
this function.
HOME